Nucleic acid freezing centrifugal dryer CV600

1. Modular design, centrifugal chamber/vacuum chamber, vacuum pump, cold trap are independent body, can be freely assembled.

2. LCM section LCD control panel, microcomputer control, to provide higher brightness, higher contrast

3. One key start function, the whole process in one go, a high degree of automation.

4. Built-in vacuum delay function, vacuum after the speed reaches the preset value

5. Ac frequency conversion maintenance-free induction motor, electromagnetic drive centrifugal system, low noise, maintenance-free

6. Temperature control shortcut key design: 0℃, 30℃, 45℃ and 60℃, to ensure the safety and effective concentration of a variety of samples

7. Teflon-coated rotors can be autoclaved at high temperature (20 minutes, 121 °C)

8. Equipped with centrifugal flash lamp, sample concentration can be observed without stopping the machine

9. Corrosion resistance: The cavity is Teflon coated aluminum alloy

10. The original imported pressure reducing valve has automatic vacuum release, easy to operate and safe, with automatic switch function

11. Speed range: 300rpm to 1800rpm adjustable.

12. Maximum centrifugal force: ≥430×g

13. Timing range: 0-9999min adjustable

14. Limit vacuum value: < 30Pa

15. Temperature setting range: -5 to 80℃, increasing by 1℃

16. System design safety: automatic vacuum discharge after power failure to protect sample safety

17. Parameters can be modified at any time during operation, simple and fast

18. Angle rotor 90x1.5ml can be double-layer superposition, single sample processing capacity up to 180

19. Adopt imported fluorine-free refrigeration compressor, refrigeration speed is fast, low noise

20. High recovery efficiency: Hang directly in the solvent

【Optional Accessories】